Lowongan Kerja JOB Pertamina Medco Sulawesi Tahun 2011

Share

HOT NEWS !

Sejak Tahun 2014, Ujian CPNS dilaksanakan secara online dengan sistem Computer Assisted Test (CAT).

Apakah Anda sudah mengenal ujian dengan sistem CAT..?

Pelajari Info lengkapnya ...
Klik Disini >>

JOB Pertamina Medco E&P Tomori Sulawesi is joint operating body between PT Pertamina Hulu Energy and PT Medco E&P Indonesia. We are one of national oil & gas companies based on Jakarta, Indonesia. Our project on Central Sulawesi offshore (Senoro) operating since February 2011.

We are currently inviting highly dynamic, self-motivated and committed applicant to apply several positions in a challenging work environment :

Senoro Electrical Inspector

Position Description

Responsibilities :

  • Responsible to QA/QC Coordinator for all construction activity related to Quality Assurance & Quality Control.
  • Coordinate with QC Contractor for electrical material checking bought by the Contractor.
  • Responsible for all electrical equipment that bought by the Contractor such as electric pumps, genset, switch gear, MV & LV, MCC, voltage regulator, switch breaker; has pass through the testing in factory and make sure that the contractor has completed the valid document.
  • Ensure that local electrical equipment comply domestic electrical production.
  • Ensure that QC Contractor has test the electrical equipment accord with approved procedure.
  • Ensure that QC Contractor has bought necessary material that suit with certain specification.
  • Ensure & verify that the contractor has conduct merger test and other necessary test.
  • Ensure that all bought electrical equipment possess validated document and accepted to proceed to the next Migas certification
  • Coordinate with field Construction representation to conduct SAT witnessed by Migas offiicial.
  • Acting as company’s delegation in SAT stage.
  • Coordinate with contractor for all documentation aspect related to SKPP & SKPI.

Position Requirements

  • Bachelor degree of any major in Engineering
  • 10 years experience in electrical equipment area.
  • Understand electrical test equipment such as voltage generator, MCC, Switch breaker,
  • switch gear, generator set, lightning arrestor, etc.
  • Knowledgeable and understand single line diagram, schematic diagram, P & ID.
  • Knowledgeable in any kinds of electrical tools such as mega ohm tester, multi tester, multi function calibrator, high voltage tester.
  • Knowledgeable in motor installation, low and middle voltage cable, control panel, termination, cable gland, conduit, grounding, catholic protection, etc.
  • Experience in electrical equipment field such as lightning arrestor, flame arrestor, flame arrestor, grounding tester, etc.
  • Familiar with electrical code standard.

Senoro Instrumentation Inspector

Position Description

Responsibilities :

  • Responsible to QA/QC Coordinator for all construction activity related to Quality Assurance & Quality Control.
  • Responsible for all instrumentation equipment bought by EPC Contractor such as PSV and gas meter has passed the test in the factory and completed with validated document.
  • Ensure that QC Contractor has conduct examination for all instrumentation equipment accord with the approved procedure.
  • Ensure that QC Contractor has bought necessary material that suit with certain specification.
  • Verify that the Contractor has conduct function test and other necessary test.
  • Ensure that PCV, PSV and other bought instrumentation equipment has passed the test in the factory.
  • Ensure that all bought instrumentation equipment possess validated document and accepted to proceed to the next Migas certification.
  • Ensure fabricated gas meter has comply with the AFC Drawing and suit with ITP.
  • Coordinate with QC Contractor for gas meter, instrumentation equipment and calibration any equipment related with gas meter.
  • Coordinate with field Construction representation to conduct SAT witnessed by Migas offiicial.
  • Coordinate with contractor for all documentation aspect related to SKPP & SKPI.
  • Represent company to coordinate with Migas in material checking things.

Position Requirements

  • Bachelor Degree in any major of Engineering
  • 10 years experience in field instrumentation Migas operation.
  • Understand instrument engineering document/drawing : specification, data sheet, wiring/loop diagram, instalation/hook up, P & ID.
  • Understand instrumentation testing procedure : calibration, leak test, continuity test, loop test, function test and SA (Surge Arrestor)
  • Understand certification procedure including with Migas/BP Migas : metering, PSV.

Senoro Pipemill Inspector

Position Description

Responsibility :

  • Responsible to QA/QC Coordinator for all construction activity related to Quality Assurance & Quality Control, including ERW pipe quality, pipe line, fitting pipe and valve.
  • Coordinating with pipe factory’ QC to monitor the ERW pipe quality seamless
  • Responsible to ERW pipe quality or seamless bought from inside and out of country.
  • Verify the processing of ERW pipe production from the pipe mill process until it comply the standard.
  • Verify mill certificate issued by pipe mill from Indonesian factory or pipe material, valve and pipe fitting imported from out of country.
  • Ensure that contractor has conducted material checking : pipe line, pipe fitting and leak test valve that bought by EPC Contractor before deliver it to the job site.
  • Conduct material identification with certain party referred by company if any unappropriate material was found
  • Coordinate with contractor for all documentation aspect related to SKPP & SKPI.
  • Represent company to coordinate with Migas and or pipe factory, valve factory or fitting factory in material checking things.

Position Requirements

  • Bachelor Degree in Metallurgy or Mechanical Engineering
  • 10 years experience in pipeline construction.
  • Certificated as pipeline inspector
  • Certificated as welding inspector
  • Familiar with standard code ASME, ASTM, ANSI, ANT TC 1A, API, DNV, SNI.

Other jobs available :

  1. Senoro Civil/ Structural/ Architectural Inspector
  2. Senoro QC Inspection Document/Expeditor Inspector
  3. Senoro Plan & Schedule Analyst
  4. Senoro Document Controler Analyst
  5. Senoro Field Engineer – Civil/Structure/Architectural
  6. Senoro Civil/Structural Engineer
  7. Senoro Contract Engineer
  8. Senoro Piping/Mechanical Engineer
  9. Senoro Cost Control Analyst
  10. Senoro Process Engineer

Please apply by online at :

Share
Share